Leaf Spring Coil Assisters for peugeot boxer Fiat Ducato Citroen relay

Leaf Spring Coil Assisters

Peugeot Boxer, Relay & Ducato All Kits are £375 + P&P or Fitting.

Please read everything on this page, it will answer a lot of questions you may have.

We do 3 types of springs for this vehicle.

900kgs, 1100kgs, 1400kgs.

We recommend the

900kgs kit for a SWB van,

1100kgs kit for a SWB Camper

1400kgs for a large van or Motorhome.

Please ask if your not sure you require.

Models we can supply kits for

Peugeot Boxer Mk1 SWB, LWB

Peugeot Boxer Mk2 SWB, MWB, LWB

Peugeot Boxer Mk3 SWB, MWB, LWB

Citroen Relay MK1 SWB, LWB

Citroen Relay Mk2 SWB, MWB, LWB

Citroen Relay MK3 SWB, MWB, LWB

Fiat Ducato MK1 SWB, LWB

Fiat Ducato MK2 SWB, MWB, LWB

Fiat Ducato Mk3 SWB, MWB, LWB

Peugeot Boxer/ Citroen Relay & Fiat Ducato from 1994 to 2006 all have the same leaf spring set up. After some years of having the weight of all the motorhome/camper equipment sat over the rear of these vehicles. The leaf springs start to bend the opposite direction to the way they should. If you are looking at fitting one of our kits on a Camper or motorhome please check that there is nothing like a water tank fitted directly above the axle as that is where the kit sits. If you do have a water tank we do a special kit which locates in different position.

Mk1 Boxer/ Relay / Ducato

Mk2 Boxer/Relay/Ducato

Mk3 Boxer/Relay/Ducato

This is our own design owned by Custom Campers UK. If your motorhome or camper suffers from rear end sag. Custom Campers UK have developed an assister that will lift and impove ride. These are a very heavy duty pair of coil springs that fit in between the chassis and axle. They are not like other brands. These will not wear, break or weaken. We supply this kit as a D.I.Y kit or we can fit them for you. We can supply 3 load rating kits, the 900kgs, 1100kg which is recommended for the SWB models and for the bigger models we recommend the 1400kg kit.If you are looking at fitting one of our kits on a Camper or motorhome please check that there is nothing like a water tank fitted directly above the axle as that is where the kit sits. If you do have a water tank we do a special kit which locates in different position.

We offer a fitting service here in Cheshire. However if we are too far away from you why not check out our fitting agents list to see if there is a fitter near to you. You will find this list on the "Fitting Agents in the UK" page

As you can see we use very strong coil springs compared to others. Each coil spring is roughly rated at 700kgs . 1100kgs or 1400kgs

The rear of motorhomes and campers do suffer with all the weight of the equipment on board. The vehicle and leaf springs were never designed to have the constant weight sitting over the rear axle. This kit will also fit vans and pickup's

This photo was taken before the kit was fitted. The leaf springs are bending the oppisite direction.

This is after the Spring assister kit was fitted to my Talbot. As you can see it fits between the axle and the chassis. Note the correct bend in the leaf spring now.